Test ratings WINBAU PREMIUM
All Winbau® profiles were tested, the evidence of the tests are available in different kinds of certificates. Test results are provided below:
| № п./п | Profile name | Standart
ДСТУ Б В.2.6-15-99
ТУ У
25.2-32374539-001:2005 | Winbau ® |
|---|
| 1. | Tensile strength, MPа, no less, than
- frame
- shutter
- impost |
37 |
41
41
42 | | 2. | Charlie Impact resistance, kJ/m2, no less, than
- frame
- shutter
- impost | No less than 40 |
46,5
45,8
45,8 | | 3. | Vicat Softening point, °С, no less, than
- frame
- shutter
- impost |
75 |
82,8
83,2
83,2 | | 4. | Linear dimensions change after thermal action, %, no more, than
- frame
- shutter
- impost | No more than 2 |
1,24
1,23
1,18 | | 5. | Cold impact strength, -15 С
- frame
- shutter
- impost
| No more than one sample of ten damaged
|
No damages | | 6. | Welded angle joint strength σ min не менее…, (N/mm2 ), no less, than
- frame
- shutter |
35 |
43,2
43,7 | | 7. | Boundarysize deviations, mm high
- frame
- shutter
- impost
width
- frame
- shutter
- impost
bead slots
- frame
- shutter
- impost
|
±0,5
±0,3
±0,5
±0,3
±0,3 |
-0,38
+0,1
-0,38
-0,2
+0,12
+0,1
0,08
0,08
0,03 | | 8. | Wall width, mm, no less, than
outside
-frame
- shutter
- impost
outside lintels
-frame
- shutter
- impost
surrounding closed secondary chambers
-frame
- shutter
- impost |
3,0
2,7
2,5 |
2,98
2,98
2.97
2,68
2,67
2,7
2,45
2,47
2,47 | | 9. | Longitudinal straightness error, mm/m, no more, than
- frame
- shutter
- impost
|
1,0 |
0,37
0,51
0,27 | | 10. | Profile face
- color
- front-face area flaws | Should be single-colour, without color spots and inclusions
Should be without marks, scratches, bubbles
| single-colour,
without color spots and inclusions
No marks, scratches, bubbles
|
|
